KIMBLE® HI-VAC® Low Hold-Up Valve, for PTFE Plugs with Extended Tip
- Manufactured from borosilicate glass 3.3
- T-valve configuration, without tip O-Ring exposure, allows closure of the bottom arm while vacuum or gases continue to flow through the sidearms.
- O-Rings are FKM
- Designed with a precision external thread for fine control
- Can be used as a bleed up to 1/2 turn
- Full open position is at 1-1/2 turns
- Primary seal is made with a FKM O-Ring on a tapered seat
- Non-rotating PTFE shaft can be used continuously at system temperatures of 230 °C or intermittently at 275 °C
Products
| Catalog No | Bore Range (mm) | Recommended For | Quantity | |
|---|---|---|---|---|
| 826422-0004 | 0-4 | PTFE Plugs with extended tip | 1 | Find a distributor |
| 826422-0008 | 0-8 | PTFE Plugs with extended tip | 1 | Find a distributor |
Specifications
Product specifications are found on the product detail pages. Click on the product catalog number in the table above to view the individual product specifications.
Products
Products
| Catalog No | Bore Range (mm) | Recommended For | Quantity | |
|---|---|---|---|---|
| 826422-0004 | 0-4 | PTFE Plugs with extended tip | 1 | Find a distributor |
| 826422-0008 | 0-8 | PTFE Plugs with extended tip | 1 | Find a distributor |
Specification
Specifications
Product specifications are found on the product detail pages. Click on the product catalog number in the table above to view the individual product specifications.
Related Products