KIMBLE® HI-VAC® Low Hold-Up Valve, with PTFE Plug, without Tip O-Ring
- Manufactured from borosilicate glass 3.3
- The sidearms of this high-vacuum valve are bent to minimize liquid holdup that would occur in conventional valves.
- PTFE shaft seals protect the FKM O-Rings from contact with the system
- Seal design reduces outgassing
- Designed with a precision external thread for fine control
- Can be used as a bleed up to 1/2 turn
- Full open position is at 1-1/2 turns
- Primary seal is made with a FKM O-Ring on a tapered seat
- Non-rotating PTFE shaft
Products
| Catalog No | Stem OD (mm) | Bore Range (mm) | Plug Material | Remarks | Quantity | |
|---|---|---|---|---|---|---|
| 826620-0004 | 9 | 0-4 | PTFE | Shaft O-Ring Size 010 | 1 | Find a distributor |
| 826620-0008 | 13 | 0-8 | PTFE | Shaft O-Ring Size 110 | 1 | Find a distributor |
Specifications
Product specifications are found on the product detail pages. Click on the product catalog number in the table above to view the individual product specifications.
Product Overview
The perfect solution for dosing and controlling gases and liquids as a through put variant.
Products
Products
| Catalog No | Stem OD (mm) | Bore Range (mm) | Plug Material | Remarks | Quantity | |
|---|---|---|---|---|---|---|
| 826620-0004 | 9 | 0-4 | PTFE | Shaft O-Ring Size 010 | 1 | Find a distributor |
| 826620-0008 | 13 | 0-8 | PTFE | Shaft O-Ring Size 110 | 1 | Find a distributor |
Specification
Specifications
Product specifications are found on the product detail pages. Click on the product catalog number in the table above to view the individual product specifications.
Product Overview
Product Overview
The perfect solution for dosing and controlling gases and liquids as a through put variant.
Related Products