WHEATON® Leak Resistant Bottle, Natural, HDPE, 2, 43-410, 250mL
- Ideal for general laboratory applications, packaging, storage and transportation of liquids
- HDPE offers excellent chemical resistance and suitability for freezing at -100°C
- Superior linerless double seal closure ensures leak free performance
- Non-drip pour lip aids safe and clean pouring
- Molded tamper proofing bead for use with shrink band
- Choice of bottle colour - amber or natural
- Range of sizes 30ml to 1000ml
- Available as lab packs with polypropylene screw cap assembled and as bulk packed product, double bagged and twist-tied for reduced particulate, with matching closures and bottles bagged separately
- Bottles can be used as a primary receptacle for the Transport of Diagnostic Specimens as outlined in the IATA Dangerous Goods Regulations, Part 6.3.5
- Bottles meet the requirements of packaging for which retention of liquid is a basic function and capable of withstanding the pressure requirements without leakage per DOT CFR 173.27(c), ICAO 4:1.1.6, IATA 5.0.2.9 * Seal psi exceeds 14psi / 1 atmosphere / 95kPA pressure tested. Leak testing results are based on water. Results may vary when packaging other liquids. Customers are advised to test leak resistance to specific storage and transport conditions.
Specifications
| Base x Height (mm) | 107 x 47 |
| Cone Size to fit Column | 24/29 |
| Cone Size to fit Condenser | 24/29 |
| Flask Shape | Spherical |
| Key Type | Straight bore |
| Length of Sidearm (mm) | 100 |
| Nominal Capacity Siphoning Volume (mL) | 0 |
| Acetone | |
| Ring ID (mm) | 10 |
| Shank Length (mm) | 8 |
| Shape | Square |
| Side Socket | 14/23 |
| Side Socket 0° | 14/23 |
| Side Socket 10° | 19/26 |
| Side Socket 15° | 19/26 |
| Side Socket 5° | 19/26 |
| Sidearm Bore (mm) | 7 |
| Sidearm Wall Thickness (mm) | 1.5 |
| Socket Size Angled Neck | 19/26 |
| Socket Size Vertical Necks | 19/26 |
| SVL® Joint Size Angled | 2 x 30 |
| SVL® Joint Size Vertical | 1 x 15 |
| To accept Tubing OD (mm) | 17.6 - 18.4 |
| _Resistance Level | 2 |
| Label | No |
| Inner Pack Quantity | 12 |
| Coil OD (mm) | 51 |
| Coil ID (mm) | 32 |
| Minimum Number of Turns | 9 |
| Power (kW) | 20.8 |
| Finish | Glazed |
| meta_pagetitle | Quickfit cone screwthread adapter |
| Angle | 100° |
| Country Region | Region 1 |
| ISO Standard | ISO 6706 |
| Approx. Length (mm) | 12.5 |
| BSE | Yes |
| Reach | Yes |
| Latex | Yes |
| Material | HDPE |
| Color | Natural |
| Capacity (mL) | 250 |
| Diameter (mm) | 61 |
| Mouth Opening | Wide Mouth |
| Thread | 43-410 |
| Cap Material | Polypropylene |
| Height (mm) | 125 |
| Cap Style | Polypropylene screw cap purchased separately |
| Quantity | 200 |
Learn about the physical and chemical properties of our glass, plastic and rubber materials.
View Technical Information
Specifications
| Base x Height (mm) | 107 x 47 |
| Cone Size to fit Column | 24/29 |
| Cone Size to fit Condenser | 24/29 |
| Flask Shape | Spherical |
| Key Type | Straight bore |
| Length of Sidearm (mm) | 100 |
| Nominal Capacity Siphoning Volume (mL) | 0 |
| Acetone | |
| Ring ID (mm) | 10 |
| Shank Length (mm) | 8 |
| Shape | Square |
| Side Socket | 14/23 |
| Side Socket 0° | 14/23 |
| Side Socket 10° | 19/26 |
| Side Socket 15° | 19/26 |
| Side Socket 5° | 19/26 |
| Sidearm Bore (mm) | 7 |
| Sidearm Wall Thickness (mm) | 1.5 |
| Socket Size Angled Neck | 19/26 |
| Socket Size Vertical Necks | 19/26 |
| SVL® Joint Size Angled | 2 x 30 |
| SVL® Joint Size Vertical | 1 x 15 |
| To accept Tubing OD (mm) | 17.6 - 18.4 |
| _Resistance Level | 2 |
| Label | No |
| Inner Pack Quantity | 12 |
| Coil OD (mm) | 51 |
| Coil ID (mm) | 32 |
| Minimum Number of Turns | 9 |
| Power (kW) | 20.8 |
| Finish | Glazed |
| meta_pagetitle | Quickfit cone screwthread adapter |
| Angle | 100° |
| Country Region | Region 1 |
| ISO Standard | ISO 6706 |
| Approx. Length (mm) | 12.5 |
| BSE | Yes |
| Reach | Yes |
| Latex | Yes |
| Material | HDPE |
| Color | Natural |
| Capacity (mL) | 250 |
| Diameter (mm) | 61 |
| Mouth Opening | Wide Mouth |
| Thread | 43-410 |
| Cap Material | Polypropylene |
| Height (mm) | 125 |
| Cap Style | Polypropylene screw cap purchased separately |
| Quantity | 200 |
Learn about the physical and chemical properties of our glass, plastic and rubber materials.
View Technical InformationFrequently Asked Questions
A plastic laboratory bottle is used to store, transport, and handle liquids such as buffers, reagents, and laboratory solutions. WHEATON® HDPE bottles from DWK Life Sciences are designed to support safe, reliable liquid containment across research, pharmaceutical, and industrial workflows, helping maintain sample integrity while reducing the risk of spills during routine handling.
HDPE plastic laboratory bottles offer a durable and lightweight alternative to glass, making them well suited for environments where breakage risk must be minimized. WHEATON® HDPE bottles combine impact resistance with reliable sealing performance, making them ideal for high-use workflows or situations where safer handling and transport are priorities, while still maintaining good chemical compatibility for many common reagents.
Yes. WHEATON® HDPE bottles are manufactured from high-quality materials that provide strong resistance to many acids, bases, and aqueous solutions. This makes them suitable for a wide range of laboratory applications. For more aggressive chemicals, DWK recommends verifying compatibility using standard chemical resistance guidelines to ensure long-term performance and safety.
Leak-proof* WHEATON® bottles are engineered to provide secure sealing that minimizes the risk of spills, exposure, and contamination. A reliable closure system ensures that liquids remain contained during storage and transport, supporting safer laboratory operations and protecting both samples and users from unintended exposure.