QUICKFIT® Condenser, cold finger, with ground cone
- Manufactured from 3.3 expansion borosilicate glass complying with ISO 3585 (ASTM E-438 Type 1 Class A)
- Also known as immersion condensers
- Can be used to regulate refluxing by adjusting the flow of air or water through it
- Supplied with detachable plastic screw thread connectors which allow 9mm bore flexible tubing to be fitted easily and safely
Products
| Catalog No | Approx Condensing Area Cm2 | Cone (NS) | Cold Finger Length (mm) | Overall Length (mm) | Quantity | |
|---|---|---|---|---|---|---|
| FC14/00/SC | - | 19/26 | 100 | 185 | 1 | Find a distributor |
Specifications
Product specifications are found on the product detail pages. Click on the product catalog number in the table above to view the individual product specifications.
Product Overview
Both inlet and outlet ports are on the top of the condenser. Cold fingers are also used to condense vapours produced by sublimation in which case the result is a solid that adheres to the outside of the tube (finger) that must be scraped off.
Products
Products
| Catalog No | Approx Condensing Area Cm2 | Cone (NS) | Cold Finger Length (mm) | Overall Length (mm) | Quantity | |
|---|---|---|---|---|---|---|
| FC14/00/SC | - | 19/26 | 100 | 185 | 1 | Find a distributor |
Specification
Specifications
Product specifications are found on the product detail pages. Click on the product catalog number in the table above to view the individual product specifications.
Product Overview
Product Overview
Both inlet and outlet ports are on the top of the condenser. Cold fingers are also used to condense vapours produced by sublimation in which case the result is a solid that adheres to the outside of the tube (finger) that must be scraped off.
Related Products