DURAN® Filter Funnel Head with PP Funnel, 30 mL

with PP funnel and two FKM seals
  • Interchangeable filter disks allow a specific selection of the filter
  • Available in three filter diameters, each of which are available in four different porosities
  • In order to allow a simple and safe removal of the filtered material, the filter plate must be inserted between two FKM seals.
  • Long filter disk service life, as disks are not damaged when the filtrand is scraped off
  • Easy cleaning of both sides is possible
  • Cost-effective as components and disks can be ordered seperately as required
  • Easy-to-read scale with graduation marks to estimate the content
  • Fired-on, highly durable white print
$53.57 USD/Case of 1
Only 0 left
Catalog Number:
Product Overview
One of the most important separation methods in the laboratory environment is filtration, which is used to separate or clean different media. For this working method, filters are required which are selected according to the application with regard to size and porosity. The filter funnel head consisting of the filter head, sealing ring, glass filter disk and funnel can be dismantled into its individual parts and each individual component can be replaced or varied in order to adapt the filter to the application. The three unit sizes combined with four filter plates of different porosities each create 12 different filter options. Due to the interchangeability of its individual parts, the filter funnel head is suitable for almost any filtration.
Specifications
Capacity (mL) 30
Disc Diameter (mm) 24
Thread 28
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material PP, BORO 3.3, FKM
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Autoclavable Yes
Quantity 1
Product Overview
One of the most important separation methods in the laboratory environment is filtration, which is used to separate or clean different media. For this working method, filters are required which are selected according to the application with regard to size and porosity. The filter funnel head consisting of the filter head, sealing ring, glass filter disk and funnel can be dismantled into its individual parts and each individual component can be replaced or varied in order to adapt the filter to the application. The three unit sizes combined with four filter plates of different porosities each create 12 different filter options. Due to the interchangeability of its individual parts, the filter funnel head is suitable for almost any filtration.
Specifications
Capacity (mL) 30
Disc Diameter (mm) 24
Thread 28
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material PP, BORO 3.3, FKM
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Autoclavable Yes
Quantity 1

Need help with this product?

Our Laboratory equipment specialists are here to help you find the best product for your application. Please call or email us and we will be happy to help you find the right product for the job.