DURAN® Standard Cone, finished, NS 71/51

  • Complies with DIN 12249 Form B
  • Manufactured from borosilicate glass 3.3
  • Ground (finer grinding quality, less roughness depth)
  • The finer surface reduces the risk of jamming the cuts.
  • Minimized grease requirement
  • Tight closure due to standard ground joint
  • Glass articles for further processing
Product Overview
The conical ground joint is the most common joint in glass apparatus engineering. Ground DURAN® cores comply with DIN 12249 Form B in their design and meet higher requirements for surface roughness. This reduces the need for grinding grease and the risk of jamming. Ground joints with ground grease or PTFE sleeves should always be used. KECK™ Conical ground joint clamps are the perfect supplement for securing the conical ground joint. For a rigid, self-supporting connection.

Specifications

Specifications
Length l (mm) 170
Wall Thickness s (mm) 3.2
Diameter d (mm) 65
Diameter (mm) 65
Cone (NS) 71/51
Material BORO 3.3
Length (mm) 170
Wall Thickness (mm) 3.2
Autoclavable Yes
Quantity 10
Product Overview
The conical ground joint is the most common joint in glass apparatus engineering. Ground DURAN® cores comply with DIN 12249 Form B in their design and meet higher requirements for surface roughness. This reduces the need for grinding grease and the risk of jamming. Ground joints with ground grease or PTFE sleeves should always be used. KECK™ Conical ground joint clamps are the perfect supplement for securing the conical ground joint. For a rigid, self-supporting connection.

Specifications

Specifications
Length l (mm) 170
Wall Thickness s (mm) 3.2
Diameter d (mm) 65
Diameter (mm) 65
Cone (NS) 71/51
Material BORO 3.3
Length (mm) 170
Wall Thickness (mm) 3.2
Autoclavable Yes
Quantity 10

Need help with this product?

Our Laboratory equipment specialists are here to help you find the best product for your application. Please call or email us and we will be happy to help you find the right product for the job.