DURAN® Spherical Joint, ball, polished, S 64/40
- Manufactured from borosilicate glass 3.3
- Flexible connections of up to 15° can be realised depending on the size of the cut (angle = tightness reduced)
- Grease-free working possible
- A tight seal is made possible by the use of an additional sealing ring.
- The nominal size describes the nominal diameter of the spherical ground joint.
- Not self-supporting
- Glass articles for further processing
Find a distributor
Catalog Number:
Product Overview
The non-sanded version of the DURAN® spherical ground joint only seals over the sealing ring. Basically 2 versions of the sealing rings are available: - FEP-coated silicone rings - VITON sealing rings The nominal size is composed of the nominal diameter of the spherical ground joint and, if applicable, the clear width of the pipe diameter. This variant also enables flexible connections, these are in the angle range of 10-15°.
Specifications
| Length l (mm) | 150 |
| Wall Thickness s (mm) | 3.2 |
| Material | Boro 3.3 |
| ID (mm) | 40 |
| Length (mm) | 150 |
| Diameter d (mm) | 48 |
| Diameter (mm) | 48 |
| Cup (S) | 64 |
| Wall Thickness (mm) | 3.2 |
| Autoclavable | Yes |
| Quantity | 1 |
Related Products
Product Overview
Product Overview
The non-sanded version of the DURAN® spherical ground joint only seals over the sealing ring. Basically 2 versions of the sealing rings are available: - FEP-coated silicone rings - VITON sealing rings The nominal size is composed of the nominal diameter of the spherical ground joint and, if applicable, the clear width of the pipe diameter. This variant also enables flexible connections, these are in the angle range of 10-15°.
Specifications
Specifications
| Length l (mm) | 150 |
| Wall Thickness s (mm) | 3.2 |
| Material | Boro 3.3 |
| ID (mm) | 40 |
| Length (mm) | 150 |
| Diameter d (mm) | 48 |
| Diameter (mm) | 48 |
| Cup (S) | 64 |
| Wall Thickness (mm) | 3.2 |
| Autoclavable | Yes |
| Quantity | 1 |
Related Products
Related Products