DURAN® Evaporating Dish, with spout, 15 mL

  • Complies with DIN 12336
  • Manufactured from borosilicate glass 3.3
  • Spout for clean pouring
  • Easy-to-read scale with graduation marks to estimate the content
  • Fired-on, highly durable white ceramic
Find a distributor
Catalog Number:
Product Overview
Transferring substances and liquids into other states of aggregation and thus initiating further reactions is very important for the daily work in the laboratory. A wide variety of vessels, apparatus and equipment are used for these work.

Specifications

Specifications
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at 20 °C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURAN® are specified to ISO 3585 and ASTM-E438 Type 1 Class A.
Remarks Without labeling field
Diameter d (mm) 50
h (mm) 25
Capacity (mL) 15
Diameter (mm) 50
Bottom ID (mm) 23
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material BORO 3.3
Height (mm) 25
Autoclavable Yes
Quantity 10
Product Overview
Transferring substances and liquids into other states of aggregation and thus initiating further reactions is very important for the daily work in the laboratory. A wide variety of vessels, apparatus and equipment are used for these work.

Specifications

Specifications
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at 20 °C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURAN® are specified to ISO 3585 and ASTM-E438 Type 1 Class A.
Remarks Without labeling field
Diameter d (mm) 50
h (mm) 25
Capacity (mL) 15
Diameter (mm) 50
Bottom ID (mm) 23
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material BORO 3.3
Height (mm) 25
Autoclavable Yes
Quantity 10