DURAN® Burette, Class AS, with Schellbach stripe and PTFE key, straight standard ground joint

with batch certificate and certificate of conformity
  • Complies with ISO 385
  • Manufactured from borosilicate glass 3.3
  • The quantity of liquid required for titration, which is unknown beforehand, can be precisely read off once the reaction is complete.
  • Thanks to the precise scale they are ideal for titration.
  • Unlike the glass keys, the PTFE keys need not be greased, which makes work in the laboratory easier.
  • Calibration is based on the poured out volume (“Ex”) at a + 20 °C reference temperature.
  • The volume content tolerances conform to accuracy class AS.
  • With Schellbach stripe and circular ring graduations
  • 30 seconds waiting time
  • Fired-on, highly durable blue print
Product Overview
The original DURAN® burettes are made of highly chemically resistant borosilicate glass 3.3. Their precise scaling makes them particularly suitable for titrimetric purposes. The amount of liquid required for titration, but previously unknown, can be read off very accurately after the reaction has been completed. Adjustment is made to drain ("Ex") for + 20 °C reference temperature. This means that the quantities can be taken exactly according to the scale, since the adhesion of the liquid to the glass was taken into account during calibration. The tolerances for the volume correspond to the error limits of ISO and DIN. DURAN® burettes are available with glass or PTFE keys. Unlike glass keys, PTFE keys do not have to be greased, which simplifies work in the laboratory.
Products
Catalog No Capacity (mL) Height h (mm) Tolerance (mL) Graduation Intervals (mL) Quantity
Product Overview
The original DURAN® burettes are made of highly chemically resistant borosilicate glass 3.3. Their precise scaling makes them particularly suitable for titrimetric purposes. The amount of liquid required for titration, but previously unknown, can be read off very accurately after the reaction has been completed. Adjustment is made to drain ("Ex") for + 20 °C reference temperature. This means that the quantities can be taken exactly according to the scale, since the adhesion of the liquid to the glass was taken into account during calibration. The tolerances for the volume correspond to the error limits of ISO and DIN. DURAN® burettes are available with glass or PTFE keys. Unlike glass keys, PTFE keys do not have to be greased, which simplifies work in the laboratory.
Products
Catalog No Capacity (mL) Height h (mm) Tolerance (mL) Graduation Intervals (mL) Quantity