DURANĀ® Flat Bottom Flask, narrow neck, with beaded rim, 5000 mL
- Complies with DIN ISO 1773
- Manufactured from borosilicate glass 3.3
- Flat base means flasks can be set down without a supporting ring
- Fired-on, highly durable white ceramic
Find a distributor
Catalog Number:
Product Overview
Abdominal vessels are called flasks in the laboratory and, in addition to beakers, are other universally applicable vessels. They are used e.g. for distillation or for heating liquids.
Flasks are available in various designs: narrow and wide neck, with or without ground joint, as round or flat bottom flask. Depending on the application, the required flask with its specific components is selected.
Flasks are available in various designs: narrow and wide neck, with or without ground joint, as round or flat bottom flask. Depending on the application, the required flask with its specific components is selected.
Specifications
| Boro 3.3 | Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 Ć 10ā6 Kā1 at 20 Ā°C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURANĀ® are specified to ISO 3585 and ASTM-E438 Type 1 Class A. |
| Remarks | Non-DIN/ISO size. |
| Diameter d (mm) | 223 |
| h (mm) | 290 |
| d1 (OD) (mm) | 50 |
| Capacity (mL) | 5000 |
| Diameter (mm) | 223 |
| Marking Area | The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square. |
| Material | BORO 3.3 |
| Height (mm) | 290 |
| Autoclavable | Yes |
| Quantity | 1 |
Product Overview
Abdominal vessels are called flasks in the laboratory and, in addition to beakers, are other universally applicable vessels. They are used e.g. for distillation or for heating liquids.
Flasks are available in various designs: narrow and wide neck, with or without ground joint, as round or flat bottom flask. Depending on the application, the required flask with its specific components is selected.
Flasks are available in various designs: narrow and wide neck, with or without ground joint, as round or flat bottom flask. Depending on the application, the required flask with its specific components is selected.
Specifications
| Boro 3.3 | Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 Ć 10ā6 Kā1 at 20 Ā°C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURANĀ® are specified to ISO 3585 and ASTM-E438 Type 1 Class A. |
| Remarks | Non-DIN/ISO size. |
| Diameter d (mm) | 223 |
| h (mm) | 290 |
| d1 (OD) (mm) | 50 |
| Capacity (mL) | 5000 |
| Diameter (mm) | 223 |
| Marking Area | The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square. |
| Material | BORO 3.3 |
| Height (mm) | 290 |
| Autoclavable | Yes |
| Quantity | 1 |