DURAN® Burette, Class B, 100 mL

  • Complies with ISO 385
  • Made from borosilicate glass 3.3
  • Calibration is based on the poured out volume (“Ex”) at a + 20 °C reference temperature
  • The volume content tolerances conform to accuracy Class B
  • With straight standard ground stopcock
Find a distributor
Catalog Number:
Product Overview
The original DURAN® burettes are made of highly chemically resistant borosilicate glass 3.3. Their precise scaling makes them particularly suitable for titrimetric purposes. The amount of liquid required for titration, but previously unknown, can be read off very accurately after the reaction has been completed. Adjustment is made to drain ("Ex") for + 20 °C reference temperature. This means that the quantities can be taken exactly according to the scale, since the adhesion of the liquid to the glass was taken into account during calibration. The tolerances for the volume correspond to the error limits of ISO and DIN. DURAN® burettes are available with glass or PTFE keys. Unlike glass keys, PTFE keys do not have to be greased, which simplifies work in the laboratory.

Specifications

Specifications
Boro 3.3 Boro 3.3
Remarks Non-DIN/ISO size.
Material Boro 3.3, PP
Tolerance (mL) +/- 0.15
Capacity (mL) 100
h (mm) 870
Height (mm) 870
Graduation Intervals (mL) 0.2
Autoclavable Yes
Quantity 2
Product Overview
Product Overview
The original DURAN® burettes are made of highly chemically resistant borosilicate glass 3.3. Their precise scaling makes them particularly suitable for titrimetric purposes. The amount of liquid required for titration, but previously unknown, can be read off very accurately after the reaction has been completed. Adjustment is made to drain ("Ex") for + 20 °C reference temperature. This means that the quantities can be taken exactly according to the scale, since the adhesion of the liquid to the glass was taken into account during calibration. The tolerances for the volume correspond to the error limits of ISO and DIN. DURAN® burettes are available with glass or PTFE keys. Unlike glass keys, PTFE keys do not have to be greased, which simplifies work in the laboratory.
Specifications

Specifications

Specifications
Boro 3.3 Boro 3.3
Remarks Non-DIN/ISO size.
Material Boro 3.3, PP
Tolerance (mL) +/- 0.15
Capacity (mL) 100
h (mm) 870
Height (mm) 870
Graduation Intervals (mL) 0.2
Autoclavable Yes
Quantity 2
Related Products