WHEATON® GRAB SAMPLER® Sub Surface Grab Sampler II, 18’ (549cm) Sub Surface Grab Sampler® II

  • Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas
  • Helps meet EPA requirements for water and waste water sampling
  • Available in lengths up to 18’ (5.5m)
  • Each sampler consists of an inert polypropylene head with stainless steel fittings and an aluminum pole assembly with a golden alodine finish
  • Provided with a 1000mL narrow-mouth borosilicate glass sample bottle with a PTFE-lined cap
$1,054.49 USD/Case of 1
Currently Out of Stock
Catalog Number:
Product Overview
To use the sampler, screw a sample bottle into the head and lower to the desired depth. Pull the cable at the top of the handle which will lift a spring-loaded plunger from the bottle opening, allowing liquid to enter through four 5/8” diameter holes. Release the cable when the bottle is full to reset the plunger.

Specifications

Specifications
Replacement Parts 240481, 990477
Length (cm) 549
Length (ft) 18
Quantity 1
Product Overview
To use the sampler, screw a sample bottle into the head and lower to the desired depth. Pull the cable at the top of the handle which will lift a spring-loaded plunger from the bottle opening, allowing liquid to enter through four 5/8” diameter holes. Release the cable when the bottle is full to reset the plunger.

Specifications

Specifications
Replacement Parts 240481, 990477
Length (cm) 549
Length (ft) 18
Quantity 1