DURAN® Adapter. Cone/Screw Thread, GL 18, with Cone NS 29/32

  • Manufactured from 3.3 expansion borosilicate glass
  • Complies with DIN 12257
  • Ideal for use as a thermometer adapter, and securing gas inlet tubes and temperature probes to jointed glass assemblies
  • Tight closure due to standard ground cone joint
$837.33 USD/Case of 10
Currently Out of Stock
Catalog Number:
Product Overview
Ideal for use in securing thermometers, gas inlet tubes and temperature probes to jointed glass assemblies, these adapters feature a DIN compliant GL screw thread and standard ground cone. A range of closed and aperture screwcaps and seals are available for use with these adapters.

Specifications

Specifications
Length l (mm) 40
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at 20 °C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURAN® are specified to ISO 3585 and ASTM-E438 Type 1 Class A.
Cone (NS) 29/32
Material BORO 3.3
Length (mm) 40
Closure Standard GL 18
Autoclavable Yes
Quantity 1
Product Overview
Ideal for use in securing thermometers, gas inlet tubes and temperature probes to jointed glass assemblies, these adapters feature a DIN compliant GL screw thread and standard ground cone. A range of closed and aperture screwcaps and seals are available for use with these adapters.

Specifications

Specifications
Length l (mm) 40
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at 20 °C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURAN® are specified to ISO 3585 and ASTM-E438 Type 1 Class A.
Cone (NS) 29/32
Material BORO 3.3
Length (mm) 40
Closure Standard GL 18
Autoclavable Yes
Quantity 1