WHEATON® GRAB SAMPLER® Sub Surface Grab Sampler II, 18’ (549cm) Sub Surface Grab Sampler® II

  • Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas
  • Helps meet EPA requirements for water and waste water sampling
  • Available in lengths up to 18’ (5.5m)
  • Each sampler consists of an inert polypropylene head with stainless steel fittings and an aluminum pole assembly with a golden alodine finish
  • Provided with a 1000mL narrow-mouth borosilicate glass sample bottle with a PTFE-lined cap
Product Overview
To use the sampler, screw a sample bottle into the head and lower to the desired depth. Pull the cable at the top of the handle which will lift a spring-loaded plunger from the bottle opening, allowing liquid to enter through four 5/8” diameter holes. Release the cable when the bottle is full to reset the plunger.
Specifications
Length (cm) 549
Length (ft) 18
Product Overview
To use the sampler, screw a sample bottle into the head and lower to the desired depth. Pull the cable at the top of the handle which will lift a spring-loaded plunger from the bottle opening, allowing liquid to enter through four 5/8” diameter holes. Release the cable when the bottle is full to reset the plunger.
Specifications
Length (cm) 549
Length (ft) 18

Need help with this product?

Our Laboratory equipment specialists are here to help you find the best product for your application. Please call or email us and we will be happy to help you find the right product for the job.