Spirit Lamp from Soda-lime Glass, without socket and wick, 100 mL

  • Without filling tubulature
  • The ground cap ensures a tight seal and quick suffocation of the flame
Find a distributor
Catalog Number:
Product Overview
In order for substances to react with each other, a low heat input is often required. The spirit burner is used classically and in areas where direct gas extraction is not possible. It is an alternative to the well-known Bunsen burner.

Specifications

Specifications
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at 20 °C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURAN® are specified to ISO 3585 and ASTM-E438 Type 1 Class A.
Diameter d (mm) 75
h (mm) 103
Capacity (mL) 100
Diameter (mm) 75
Material Soda-Lime Glass
Height (mm) 103
Autoclavable No
Quantity 10
Product Overview
In order for substances to react with each other, a low heat input is often required. The spirit burner is used classically and in areas where direct gas extraction is not possible. It is an alternative to the well-known Bunsen burner.

Specifications

Specifications
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at 20 °C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURAN® are specified to ISO 3585 and ASTM-E438 Type 1 Class A.
Diameter d (mm) 75
h (mm) 103
Capacity (mL) 100
Diameter (mm) 75
Material Soda-Lime Glass
Height (mm) 103
Autoclavable No
Quantity 10