Pressure Equalization Set, for DURAN® HPLC screw cap, incl. 0.2 μm syringe filter

  • Suitable for two different HPLC tubing outer diameters 1.6 or 3.2 mm
  • Unused ports can be sealed with silicone closure / blanking seals
  • Optional sterile pressure equalisation set (25 mm syringe filter 0.2 µm)
  • Caps block solvent vapours VOCs, and keep your mobile phase clean. They improve lab health and safety, and the quality of your analysis
Find a distributor
Catalog Number:
Product Overview
The DURAN® HPLC bottle is available as a ready-made system. This comprises a special pressure resistant borosilicate glass bottle and a GL 45 screw cap with 4 ports. This enables 3 stations to be served at the same time from one reservoir. A filtered pressure equalisation set can be fitted to the fourth port. Complete system comprising: DURAN® pressure plus+ laboratory bottle with 4-port screw cap (PP); four screw connections (black, M8 thread) and silicone seals.

Specifications

Specifications
Thread GL 45
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material PP, BORO 3.3, Silicone
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Autoclavable Yes
Quantity 1
Product Overview
The DURAN® HPLC bottle is available as a ready-made system. This comprises a special pressure resistant borosilicate glass bottle and a GL 45 screw cap with 4 ports. This enables 3 stations to be served at the same time from one reservoir. A filtered pressure equalisation set can be fitted to the fourth port. Complete system comprising: DURAN® pressure plus+ laboratory bottle with 4-port screw cap (PP); four screw connections (black, M8 thread) and silicone seals.

Specifications

Specifications
Thread GL 45
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material PP, BORO 3.3, Silicone
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Autoclavable Yes
Quantity 1