WHEATON® GRAB SAMPLER® Sub Surface Grab Sampler II, 6’ (183cm) Sub Surface Grab Sampler® II
- Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas
- Helps meet EPA requirements for water and waste water sampling
- Available in lengths up to 18’ (5.5m)
- Each sampler consists of an inert polypropylene head with stainless steel fittings and an aluminum pole assembly with a golden alodine finish
- Provided with a 1000mL narrow-mouth borosilicate glass sample bottle with a PTFE-lined cap
Product Overview
To use the sampler, screw a sample bottle into the head and lower to the desired depth. Pull the cable at the top of the handle which will lift a spring-loaded plunger from the bottle opening, allowing liquid to enter through four 5/8” diameter holes. Release the cable when the bottle is full to reset the plunger.
Specifications
| Length (cm) | 183 |
| Length (ft) | 6 |
| Quantity | 1 |
Product Overview
To use the sampler, screw a sample bottle into the head and lower to the desired depth. Pull the cable at the top of the handle which will lift a spring-loaded plunger from the bottle opening, allowing liquid to enter through four 5/8” diameter holes. Release the cable when the bottle is full to reset the plunger.
Specifications
| Length (cm) | 183 |
| Length (ft) | 6 |
| Quantity | 1 |