DURAN® Round Bottom Flask, narrow neck, 10000 mL

  • Complies with DIN ISO 1773
  • Manufactured from borosilicate glass 3.3
  • Fired-on, highly durable white ceramic
$397.16 USD/Case of 1
Currently Out of Stock
Catalog Number:
Product Overview
Abdominal vessels are called flasks in the laboratory and, in addition to beakers, are other universally applicable vessels. They are used e.g. for distillation or for heating liquids.
Flasks are available in various designs: narrow and wide neck, with or without ground joint, as round or flat bottom flask. Depending on the application, the required flask with its specific components is selected.

Specifications

Specifications
Diameter d (mm) 279
h (mm) 380
d1 (OD) (mm) 65
Capacity (mL) 10000
Diameter (mm) 279
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material BORO 3.3
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 380
Autoclavable Yes
Quantity 1
Product Overview
Abdominal vessels are called flasks in the laboratory and, in addition to beakers, are other universally applicable vessels. They are used e.g. for distillation or for heating liquids.
Flasks are available in various designs: narrow and wide neck, with or without ground joint, as round or flat bottom flask. Depending on the application, the required flask with its specific components is selected.

Specifications

Specifications
Diameter d (mm) 279
h (mm) 380
d1 (OD) (mm) 65
Capacity (mL) 10000
Diameter (mm) 279
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material BORO 3.3
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 380
Autoclavable Yes
Quantity 1