DURAN® protect GLS 80® Laboratory Bottle, wide mouth, clear, plastic safety coated, with screw cap and pouring ring, PP, blue, 500 mL

  • The coating provides scratch, leak* and splinter* protection (* only applies to bottles 5000 ml and less)
  • UV protection up to approx. 380 nm due to external coating
  • Easy access to the bottle contents due to the wide diameter of the bottle neck
  • Special thread design for rapid opening and closing in less than a turn
  • Optimum filling and pouring and particularly easy cleaning
  • Spoons, spatulas and tweezers can be manipulated with ease
  • Even large-volume funnels can be inserted into the bottles without any difficulty
  • Stability due to the large base area
  • Easy-to-read scale with graduation marks to estimate the content
  • Fired-on, highly durable white ceramic
$544.95 USD/Case of 10
In stock
Catalog Number:
Product Overview
DURAN® Original GL laboratory bottles have become the gold standard of multifunctional laboratory bottles since their introduction in 1972. The protect safety-coated version of the bottles combining the best of both worlds: virtually inert USP/EP Type I borosilicate glass 3.3 glass on the inside and a protective safety plastic layer on the outside. The bottles are moulded from high-purity, clear, glass that is then coated with a clear PU plastic coating to reduce the hazards of broken glass and liquid splashes in the event of breakage. A combination of high-performance materials and robust ISO 4796-1 design provides a long working life. The bottles feature an easy-to-read graduated volume scale, and marking field in permanent white enamel. Permanent Retrace Code on each bottle for manufacturing lot traceability. The protect safety coating meets the requirements of ASTM E1522, and is fully autoclavable at 121 or 134 °C.

Specifications

Specifications
h (mm) 153
Diameter d (mm) 101
Capacity (mL) 500
Diameter (mm) 101
Thread GLS 80®
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material PP, BORO 3.3
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 153
Autoclavable Yes
Retrace Code This is a lot number printed on the product during the manufacturing process used for identification of the production unit, the production work order and for traceability of the materials used.
Quantity 10
Product Overview
DURAN® Original GL laboratory bottles have become the gold standard of multifunctional laboratory bottles since their introduction in 1972. The protect safety-coated version of the bottles combining the best of both worlds: virtually inert USP/EP Type I borosilicate glass 3.3 glass on the inside and a protective safety plastic layer on the outside. The bottles are moulded from high-purity, clear, glass that is then coated with a clear PU plastic coating to reduce the hazards of broken glass and liquid splashes in the event of breakage. A combination of high-performance materials and robust ISO 4796-1 design provides a long working life. The bottles feature an easy-to-read graduated volume scale, and marking field in permanent white enamel. Permanent Retrace Code on each bottle for manufacturing lot traceability. The protect safety coating meets the requirements of ASTM E1522, and is fully autoclavable at 121 or 134 °C.

Specifications

Specifications
h (mm) 153
Diameter d (mm) 101
Capacity (mL) 500
Diameter (mm) 101
Thread GLS 80®
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material PP, BORO 3.3
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 153
Autoclavable Yes
Retrace Code This is a lot number printed on the product during the manufacturing process used for identification of the production unit, the production work order and for traceability of the materials used.
Quantity 10