DURANĀ® Crystallizing Dish, without spout, 2000 mL
- Complies with DIN 12337
- Manufactured from borosilicate glass 3.3
- Flat and wide shape allow solvents to evaporate quickly and evenly
- Large ground base
- Spout for clean pouring
- Fired-on, highly durable white ceramic
$1,212.78
USD/Case of 10
Currently Out of Stock
Catalog Number:
Product Overview
Transferring substances and liquids into other states of aggregation and thus initiating further reactions is very important for the daily work in the laboratory. A wide variety of vessels, apparatus and equipment are used for these work.
Specifications
| Boro 3.3 | Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 Ć 10ā6 Kā1 at 20 Ā°C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURANĀ® are specified to ISO 3585 and ASTM-E438 Type 1 Class A. |
| Diameter d (mm) | 190 |
| h (mm) | 90 |
| Capacity (mL) | 2000 |
| Diameter (mm) | 190 |
| Marking Area | The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square. |
| Material | BORO 3.3 |
| Height (mm) | 90 |
| Autoclavable | Yes |
| Quantity | 10 |
Related Products
Product Overview
Transferring substances and liquids into other states of aggregation and thus initiating further reactions is very important for the daily work in the laboratory. A wide variety of vessels, apparatus and equipment are used for these work.
Specifications
| Boro 3.3 | Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 Ć 10ā6 Kā1 at 20 Ā°C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURANĀ® are specified to ISO 3585 and ASTM-E438 Type 1 Class A. |
| Diameter d (mm) | 190 |
| h (mm) | 90 |
| Capacity (mL) | 2000 |
| Diameter (mm) | 190 |
| Marking Area | The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square. |
| Material | BORO 3.3 |
| Height (mm) | 90 |
| Autoclavable | Yes |
| Quantity | 10 |
Related Products