DURAN® Twin-Neck Round Bottom Flask, Centre Neck 29/32, Angled Side Neck NS 14/23, 100 mL

with standard ground joints angled side neck
  • Manufactured from 3.3 expansion borosilicate glass
  • The twin-neck design allows two separate components to fitted directly to the flask
  • Vertical centre neck and one angled side neck with NS 14/23 standard ground joint
  • The geometry of the flask permits very uniform heating of the flask contents
  • Tight closure due to standard ground joints
  • Fired-on, highly durable white print
Product Overview
Multi-neck flasks (two or three neck flasks) are used for a wide variety of applications where it is necessary to connect multiple components i.e. condensers, adapters, thermometers, etc., directly to the flask. Multi-neck flasks are used for wide variety of organic and inorganic chemistry applications, including distillation, fractionation and reactions of all kinds.

Specifications

Specifications
Diameter d (mm) 64
Capacity (mL) 100
Diameter (mm) 64
Side Arm Thread NS 14/23
Center neck (NS) NS 29/32
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material BORO 3.3
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 105
Autoclavable Yes
Quantity 1
Product Overview
Multi-neck flasks (two or three neck flasks) are used for a wide variety of applications where it is necessary to connect multiple components i.e. condensers, adapters, thermometers, etc., directly to the flask. Multi-neck flasks are used for wide variety of organic and inorganic chemistry applications, including distillation, fractionation and reactions of all kinds.

Specifications

Specifications
Diameter d (mm) 64
Capacity (mL) 100
Diameter (mm) 64
Side Arm Thread NS 14/23
Center neck (NS) NS 29/32
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material BORO 3.3
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 105
Autoclavable Yes
Quantity 1

Need help with this product?

Our Laboratory equipment specialists are here to help you find the best product for your application. Please call or email us and we will be happy to help you find the right product for the job.