DURAN® Stopcock with PTFE Spindle, for threaded outlets (GL 32)

  • Manufactured from borosilicate glass 3.3
  • Small grinding opening of the spindle valve allows a slow inflow of gases or air and thus prevents excessive turbulence
  • Tight closure due to standard ground joint
  • For threaded outlets of MOBILEX type desiccator (GL 32)
  • With PTFE spindle
Find a distributor
Catalog Number:
Product Overview
The PTFE spindle valve is used for airtight sealing of a desiccator. For this purpose, the spindle tap is connected to the standard ground joint of the desiccator cover. The very small, punctual opening in the lower part of the spindle valve allows a slow inflow of gases or air when the valve is opened, thus reducing a strong turbulence inside the desiccator.

Specifications

Specifications
Diameter d (mm) 8
Length l (mm) 160
Diameter (mm) 8
Material BORO 3.3, PTFE
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Length (mm) 160
Autoclavable Yes
Quantity 1
Product Overview
The PTFE spindle valve is used for airtight sealing of a desiccator. For this purpose, the spindle tap is connected to the standard ground joint of the desiccator cover. The very small, punctual opening in the lower part of the spindle valve allows a slow inflow of gases or air when the valve is opened, thus reducing a strong turbulence inside the desiccator.

Specifications

Specifications
Diameter d (mm) 8
Length l (mm) 160
Diameter (mm) 8
Material BORO 3.3, PTFE
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Length (mm) 160
Autoclavable Yes
Quantity 1