DURAN® Standard Cone with tip, finished, NS 29/32

finished
  • Complies with DIN 12249 Form G
  • Manufactured from borosilicate glass 3.3
  • Ground (finer grinding quality, less roughness depth)
  • The additional drain on the grinding enables a clean drain/leakage of liquids without wetting the grinding.
  • Tight closure due to standard ground joint
  • Glass articles for further processing
Product Overview
The DURAN® Standard Cones with tip comply with DIN 12249 Form G. The process has the function of a drip ring. It prevents the liquid from running down the inner wall of the vessel. For this purpose, the outlet is usually cut at an angle and fused. At the same time, mediums do not come into contact with the greased ground surface. The additional outlet can also be used as an attachment point for extensions for various purposes, e.g. as an inlet pipe. Cone cut with tip.

Specifications

Specifications
Length l (mm) 145
Wall Thickness s (mm) 2
Diameter d (mm) 26
Diameter (mm) 26
Cone (NS) 29/32
Material BORO 3.3
Length (mm) 145
Wall Thickness (mm) 2
Autoclavable Yes
Quantity 50
Product Overview
The DURAN® Standard Cones with tip comply with DIN 12249 Form G. The process has the function of a drip ring. It prevents the liquid from running down the inner wall of the vessel. For this purpose, the outlet is usually cut at an angle and fused. At the same time, mediums do not come into contact with the greased ground surface. The additional outlet can also be used as an attachment point for extensions for various purposes, e.g. as an inlet pipe. Cone cut with tip.

Specifications

Specifications
Length l (mm) 145
Wall Thickness s (mm) 2
Diameter d (mm) 26
Diameter (mm) 26
Cone (NS) 29/32
Material BORO 3.3
Length (mm) 145
Wall Thickness (mm) 2
Autoclavable Yes
Quantity 50

Need help with this product?

Our Laboratory equipment specialists are here to help you find the best product for your application. Please call or email us and we will be happy to help you find the right product for the job.