DURAN® Standard Cone with tip, finished, NS 14/23

  • Complies with DIN 12249 Form G
  • Manufactured from borosilicate glass 3.3
  • Ground (finer grinding quality, less roughness depth)
  • The additional drain on the grinding enables a clean drain/leakage of liquids without wetting the grinding.
  • Tight closure due to standard ground joint
  • Glass articles for further processing
$4,316.06 USD/Case of 1000

This Product is Made to Order

Your order will be packed based on these product specifications and shipment details provided after order completion.

Catalog Number:
Product Overview
The DURAN® Standard Cones with tip comply with DIN 12249 Form G. The process has the function of a drip ring. It prevents the liquid from running down the inner wall of the vessel. For this purpose, the outlet is usually cut at an angle and fused. At the same time, mediums do not come into contact with the greased ground surface. The additional outlet can also be used as an attachment point for extensions for various purposes, e.g. as an inlet pipe.

Specifications

Specifications
Length l (mm) 130
Wall Thickness s (mm) 1.5
Material Boro 3.3
Length (mm) 130
Diameter d (mm) 13
Diameter (mm) 13
Cone (NS) 14/23
Wall Thickness (mm) 1.5
Autoclavable Yes
Quantity 1000
Product Overview
Product Overview
The DURAN® Standard Cones with tip comply with DIN 12249 Form G. The process has the function of a drip ring. It prevents the liquid from running down the inner wall of the vessel. For this purpose, the outlet is usually cut at an angle and fused. At the same time, mediums do not come into contact with the greased ground surface. The additional outlet can also be used as an attachment point for extensions for various purposes, e.g. as an inlet pipe.
Specifications

Specifications

Specifications
Length l (mm) 130
Wall Thickness s (mm) 1.5
Material Boro 3.3
Length (mm) 130
Diameter d (mm) 13
Diameter (mm) 13
Cone (NS) 14/23
Wall Thickness (mm) 1.5
Autoclavable Yes
Quantity 1000
Related Products