DURANĀ® Micro Immersion Filter, Porosity 2
- Manufactured from 3.3 expansion borosilicate glass
- Clarification filtration is possible - solids settle on the bottom and a supernatant solution can be filtered off
- Fired-on, highly durable white print
Find a distributor
Catalog Number:
Product Overview
Filtrations are possible in many different ways. A filtration variant at reduced pressure is clarification filtration, in which larger quantities of liquid are to be filtered. In this method, the precipitate is allowed to settle and the liquid above is sucked off through an immersion filter. This prevents the formation of a filter cake which could clog the filter and reduce the filtration speed.
Specifications
| Boro 3.3 | Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 Ć 10ā6 Kā1 at 20 Ā°C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURANĀ® are specified to ISO 3585 and ASTM-E438 Type 1 Class A. |
| Diameter d (mm) | 6 |
| h (mm) | 100 |
| d1 (OD) (mm) | 10 |
| Diameter (mm) | 6 |
| Porosity | 2 |
| Material | BORO 3.3 |
| Height (mm) | 100 |
| Autoclavable | Yes |
| Quantity | 10 |
Product Overview
Filtrations are possible in many different ways. A filtration variant at reduced pressure is clarification filtration, in which larger quantities of liquid are to be filtered. In this method, the precipitate is allowed to settle and the liquid above is sucked off through an immersion filter. This prevents the formation of a filter cake which could clog the filter and reduce the filtration speed.
Specifications
| Boro 3.3 | Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 Ć 10ā6 Kā1 at 20 Ā°C. It also conforms to the requirements of a USP/EP/JP Type 1 neutral glass suitable for use by the pharmaceutical industry. The properties of DURANĀ® are specified to ISO 3585 and ASTM-E438 Type 1 Class A. |
| Diameter d (mm) | 6 |
| h (mm) | 100 |
| d1 (OD) (mm) | 10 |
| Diameter (mm) | 6 |
| Porosity | 2 |
| Material | BORO 3.3 |
| Height (mm) | 100 |
| Autoclavable | Yes |
| Quantity | 10 |