DURAN® Filter Apparatus Witt Type, Socket Size NS 29/ 32, DN 200

  • Manufcatured from 3.3 expansion borosilicate glass
  • Suitable for use under vacuum
  • With tight fitting interchangeable DN flat flange lid with 29/32 ground socket
  • The KECK™ tubing assembly set allows the connection of 9 mm bore vacuum tubing
  • Fired-on, highly durable white print
Find a distributor
Catalog Number:
Product Overview
One of the most important separation methods in the laboratory environment is filtration, which is used to separate or clean different media. For this working method, filters are required which are selected according to the application with regard to size and porosity. These Witt type filtration apparatus are used for large capacity vacuum filtration applications where the filtrate will be further processed.

Specifications

Specifications
h (mm) 300
remarks suitable lid for filter apparatus: cat. no 24 398 61 09
h1 (mm) 126
DN 200
Socket Size 29/32
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material PP, BORO 3.3, PBT, EPDM, VMQ
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 300
Autoclavable Yes
Quantity 1
Product Overview
One of the most important separation methods in the laboratory environment is filtration, which is used to separate or clean different media. For this working method, filters are required which are selected according to the application with regard to size and porosity. These Witt type filtration apparatus are used for large capacity vacuum filtration applications where the filtrate will be further processed.

Specifications

Specifications
h (mm) 300
remarks suitable lid for filter apparatus: cat. no 24 398 61 09
h1 (mm) 126
DN 200
Socket Size 29/32
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material PP, BORO 3.3, PBT, EPDM, VMQ
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 300
Autoclavable Yes
Quantity 1