DURAN® Engler Flask, beaded rim, ASTM & DIN, 125 mL

  • Conforms to ASTM D86 and DIN EN ISO 3405
  • Manufactured from borosilicate glass 3.3
  • The beaded rim allows precise pouring
  • Fired-on, highly durable white ceramic
Find a distributor
Catalog Number:
Product Overview
Abdominal vessels are called flasks in the laboratory and, in addition to beakers, are other universally applicable vessels. They are used e.g. for distillation or for heating liquids. In addition to the commonly used multi-neck flasks, Engler flasks can also be used for distillations. This type of distillation flask has a fixed side arm which is attached to the neck of the flask. Via this side arm, the steam is led into a cooler where it finally condenses to the distillate. Thermometers can be introduced via the neck of the flask.

Specifications

Specifications
Diameter d (mm) 69
h (mm) 215
d1 (OD) (mm) 22
Capacity (mL) 125
Diameter (mm) 69
Side Arm OD (mm) 7
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material BORO 3.3
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Side Arm Length (mm) 100
Height (mm) 215
Autoclavable Yes
Quantity 2
Product Overview
Abdominal vessels are called flasks in the laboratory and, in addition to beakers, are other universally applicable vessels. They are used e.g. for distillation or for heating liquids. In addition to the commonly used multi-neck flasks, Engler flasks can also be used for distillations. This type of distillation flask has a fixed side arm which is attached to the neck of the flask. Via this side arm, the steam is led into a cooler where it finally condenses to the distillate. Thermometers can be introduced via the neck of the flask.

Specifications

Specifications
Diameter d (mm) 69
h (mm) 215
d1 (OD) (mm) 22
Capacity (mL) 125
Diameter (mm) 69
Side Arm OD (mm) 7
Marking Area The marking area is a printed ceramic area on laboratory glassware for marking / identification using a wax pencil. Also called marking field, white marking spot or marking square.
Material BORO 3.3
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Side Arm Length (mm) 100
Height (mm) 215
Autoclavable Yes
Quantity 2