DURAN® Burette, Class AS, with Schellbach stripe and glass key, 10 mL

  • Complies with ISO 385
  • Manufactured from borosilicate glass 3.3
  • The quantity of liquid required for titration, which is unknown beforehand, can be precisely read off once the reaction is complete.
  • The precise scaling makes them particularly suitable for titrimetric purposes
  • Calibration is based on the poured out volume (“Ex”) at a + 20 °C reference temperature.
  • The volume content tolerances conform to accuracy class AS
  • With Schellbach stripe and circular ring graduations
  • waiting time: 30 seconds
  • Fired-on, highly durable blue print
Find a distributor
Catalog Number:
Product Overview
The original DURAN® burettes are made of highly chemically resistant borosilicate glass 3.3. Their precise scaling makes them particularly suitable for titrimetric purposes. The amount of liquid required for titration, but previously unknown, can be read off very accurately after the reaction has been completed. Adjustment is made to drain ("Ex") for + 20 °C reference temperature. This means that the quantities can be taken exactly according to the scale, since the adhesion of the liquid to the glass was taken into account during calibration. The tolerances for the volume correspond to the error limits of ISO and DIN. DURAN® burettes are available with glass or PTFE keys. Unlike glass keys, PTFE keys do not have to be greased, which simplifies work in the laboratory.

Specifications

Specifications
Boro 3.3 Boro 3.3
Material Boro 3.3, PTFE
Tolerance (mL) +/- 0.02
Capacity (mL) 10
h (mm) 820
Height (mm) 820
Graduation Intervals (mL) 0.02
Autoclavable Yes
Retrace Code Retrace Code
Quantity 2
Product Overview
Product Overview
The original DURAN® burettes are made of highly chemically resistant borosilicate glass 3.3. Their precise scaling makes them particularly suitable for titrimetric purposes. The amount of liquid required for titration, but previously unknown, can be read off very accurately after the reaction has been completed. Adjustment is made to drain ("Ex") for + 20 °C reference temperature. This means that the quantities can be taken exactly according to the scale, since the adhesion of the liquid to the glass was taken into account during calibration. The tolerances for the volume correspond to the error limits of ISO and DIN. DURAN® burettes are available with glass or PTFE keys. Unlike glass keys, PTFE keys do not have to be greased, which simplifies work in the laboratory.
Specifications

Specifications

Specifications
Boro 3.3 Boro 3.3
Material Boro 3.3, PTFE
Tolerance (mL) +/- 0.02
Capacity (mL) 10
h (mm) 820
Height (mm) 820
Graduation Intervals (mL) 0.02
Autoclavable Yes
Retrace Code Retrace Code
Quantity 2
Related Products