DURAN® Automatic Burette Pellet-type, class AS, with PTFE key and reservoir bottle, 10 mL

  • Complies with ISO 385
  • Made from borosilicate glass 3.3
  • Calibration is based on the poured out volume (“Ex”) at a + 20 °C reference temperature
  • The volume content tolerances conform to accuracy Class AS
  • side-positioned standard ground stopcock and PTFE key, Schellbach stripe
  • Graduated, main volumes ring marked
  • 30 seconds waiting time
Find a distributor
Catalog Number:
Product Overview
The original DURAN® burettes are made of highly chemically resistant borosilicate glass 3.3. Their precise scaling makes them particularly suitable for titrimetric purposes. The amount of liquid required for titration, but previously unknown, can be read off very accurately after the reaction has been completed. Adjustment is made to drain ("Ex") for + 20 °C reference temperature. This means that the quantities can be taken exactly according to the scale, since the adhesion of the liquid to the glass was taken into account during calibration. The tolerances for the volume correspond to the error limits of ISO and DIN. DURAN® burettes are available with glass or PTFE keys. Unlike glass keys, PTFE keys do not have to be greased, which simplifies work in the laboratory. Automatic burettes with a batch number and accuracy Class AS are supplied with a batch certificate. This certificate documents the mean value obtained from measuring the batch in question, the standard deviation and the day of issue. The batch certificates can also be retrieved online. The batch number consists of four digits. The first two numbers specify the production year, and the following two numbers specify the batch, e.g.: 18.01.

Specifications

Specifications
h (mm) 930
Capacity (mL) 10
Material PP, BORO 3.3, PTFE, PVC
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 930
Graduation Intervals (mL) 0.02
Tolerance (mL) +/- 0.02
Autoclavable Yes
Retrace Code This is a lot number printed on the product during the manufacturing process used for identification of the production unit, the production work order and for traceability of the materials used.
Quantity 1
Product Overview
The original DURAN® burettes are made of highly chemically resistant borosilicate glass 3.3. Their precise scaling makes them particularly suitable for titrimetric purposes. The amount of liquid required for titration, but previously unknown, can be read off very accurately after the reaction has been completed. Adjustment is made to drain ("Ex") for + 20 °C reference temperature. This means that the quantities can be taken exactly according to the scale, since the adhesion of the liquid to the glass was taken into account during calibration. The tolerances for the volume correspond to the error limits of ISO and DIN. DURAN® burettes are available with glass or PTFE keys. Unlike glass keys, PTFE keys do not have to be greased, which simplifies work in the laboratory. Automatic burettes with a batch number and accuracy Class AS are supplied with a batch certificate. This certificate documents the mean value obtained from measuring the batch in question, the standard deviation and the day of issue. The batch certificates can also be retrieved online. The batch number consists of four digits. The first two numbers specify the production year, and the following two numbers specify the batch, e.g.: 18.01.

Specifications

Specifications
h (mm) 930
Capacity (mL) 10
Material PP, BORO 3.3, PTFE, PVC
Boro 3.3 Borosilicate glass 3.3 has a very good chemical resistance, virtual inert behavior, a high maximum usage temperature, high light transparency and minimal thermal expansion. Borosilicate glass 3.3 has a linear coefficient of expansion of 3.3 × 10−6 K−1 at
Height (mm) 930
Graduation Intervals (mL) 0.02
Tolerance (mL) +/- 0.02
Autoclavable Yes
Retrace Code This is a lot number printed on the product during the manufacturing process used for identification of the production unit, the production work order and for traceability of the materials used.
Quantity 1